Rim, Tire, and Inner Tube: How to Replace Them on an All-Terrain Wheel
This guide shows you how to replace the rim, tire, and inner tube on your all-terrain wheel. Keeping these components in top shape ensures your board's performance and safety.
Here's how to replace a rim, tire, or inner tube on an all-terrain wheel. Your board's performance and safety depend on these parts being in good condition.
- Tire wear: Tires wear down over time, and this can become dangerous.
- Defective inner tube: A damaged inner tube can lead to punctures.
- Damaged Rim: A damaged rim can throw off your board's stability.
- New rim, tire, and/or inner tube
- 1/8 Allen Key (this comes with your Y-Tool when you get your board)
Remove all the air from the inner tube. This makes disassembly much easier.
Grab your Allen key and remove the six screws holding the two halves of the rim together. Keep the wheel flat on a table so the nuts don't fall out.
Separate the Rim Halves: Keep the wheel on the table as you separate the two halves. Set the top half aside, making sure the screws stay in their holes.
Release the Bottom Half: Push the tire to free it from the bottom half of the rim.
Remove the Inner Tube: If your inner tube is still good, you can reuse it. Otherwise, swap it out for a new one.
Install the New Tire: Put a little air into the new inner tube to give it some shape; this makes it easier to position inside the tire. Then, place the inner tube into the new tire. Make sure the inner tube doesn't stick out from the tire. This prevents pinching when you reassemble the rim, which could cause a flat.
Align the Valve: Line up the inner tube valve with the notch in the rim.
Assemble the Rim Halves: Place the top half of the rim, aligning its notch with the valve. Drop the screws in so they fall through the holes on the other side of the rim.
Star Tightening: Tighten the screws in a star pattern for even fastening. Double-check that the nuts aren't protruding and are securely tightened.
Inflate to 3 bars: Inflate the tire to 3 bars. This gives you the best range and performance.
By following these steps, you can easily replace the rim, tire, and inner tube on your electric skateboard's all-terrain wheel.
This process keeps your board in excellent condition and performing at its peak.
For more details on changing the rim, tire, and inner tube, be sure to check out our video on YouTube.
For more details on changing the rim, tire, and inner tube, be sure to check out our video on YouTube.