How to Replace Your GTR Electric Longboard Battery Step-by-Step Guide
We'll show you how to replace the battery in your GTR electric longboard. Replacing the battery helps maintain your board's top performance. Follow these steps for an easy and safe replacement.
We'll show you how to replace the battery in your GTR electric longboard. Replacing the battery helps maintain your board's top performance. Follow these steps for an easy and safe replacement.
- Range: A new battery ensures maximum range for your rides.
- Performance: Keeps your skateboard's performance at an optimal level.
- Safety: Avoids risks associated with a worn or defective battery.
- Y-Tool (Included with your skateboard)
- Allen Key (Included with your skateboard or a 1/8 Allen key)
Make sure you have your Y-Tool and Allen key.
Before you begin, ensure your skateboard is turned off for safety reasons.
Unscrew the screws: Use the Allen key to unscrew all the screws on the deck.
Remove the last screw: Start by unscrewing the screw shown in the top photo. Keep the last screw, located in the center and front of the deck (shown in the bottom photo), for last. This holds the battery in place until you are ready to remove it.
Support the battery: Place your hand under the battery as you remove the last screw to prevent it from falling.
Disconnect the main connector: Pull the main connector evenly to unplug it. Avoid pulling on the connector wires to prevent damage.
Align the connectors: Make sure the arrows and Evolve logos on the connectors are aligned (on the same side).
Connect the new battery: Plug in the new battery and check that the blue light turns on to confirm a correct connection.
Position the battery: Slide the new battery's connector wire into the designated cavity.
Screw in the first screw: Start by screwing in one screw (see photo) to hold the battery in place.
Align the holes: The second screw to tighten is the one at the front of the deck in the middle (This is the last screw you unscrewed when you removed the old battery). Make sure the holes are aligned before screwing in the second screw.
Tighten the screws: Tighten the screws firmly but without forcing to avoid damaging the deck.
Functionality test: Turn on the skateboard to check that everything is working correctly.
Safety: Make sure all screws are tight and the battery is securely in place.
To replace the battery of your GTR Bamboo electric longboard, simply follow these steps. You will regain optimal performance and range like new.
Our YouTube video shows you the entire procedure in detail.
By following these steps, you can easily replace the battery of your GTR Bamboo electric longboard, ensuring better performance and maximum range. For more details on battery replacement, check out our YouTube video.