RENEGADE GRIP TAPE
Official Replacement Grip for Evolve Renegade and Diablo Renegade - Designed for Bindings
Replace the grip on your Evolve Renegade with this grip tape specially designed for setups with bindings. The Renegade is unique in the Evolve lineup with its mountainboard bindings that allow for total control, even in extreme all-terrain conditions. This replacement grip includes precise cut-outs for the binding locations, ensuring a perfect fit and hassle-free installation. Available in Renegade V1 or Diablo Renegade versions, depending on your model.
- Integrated Binding Cut-outs - Pre-cut to the exact locations of the Renegade bindings
- All-Terrain Grip - Reinforced granular surface for intense off-road sessions
- 2 Versions Available - Original Renegade V1 or Diablo Renegade, depending on your setup
- Installation Guide - Video tutorial adapted to the specificities of mounting with bindings
RENEGADE GRIP TAPE COMPATIBILITY
Identify your model to choose the correct grip tape version.
Renegade V1 (Original)
The Renegade V1 grip tape is designed for the original Renegade model with its specific deck and characteristic binding placements. This version perfectly adapts to the contours of the first-generation Renegade deck, with precise cutouts for the four binding attachment points. If you purchased your Renegade before the Diablo launch, this is the version you need.
Diablo Renegade
The Diablo Renegade grip tape is designed for the Diablo configuration equipped with Renegade bindings. Since the Diablo deck has different dimensions than the original Renegade, this grip is adapted to its shape while integrating the cutouts for the bindings. If you have a standard Diablo without bindings, choose the classic Diablo Grip Tape instead.
INSTALLATION TUTORIAL
Replace your Renegade grip tape by following our instructions.
FREQUENTLY ASKED QUESTIONS - RENEGADE GRIP TAPE
Do I need to remove the bindings to change the grip tape?
Yes, it is necessary to remove the bindings before replacing the Renegade grip tape. Start by unscrewing the four mounting screws for each binding. Then, remove the old grip using a hairdryer to soften the adhesive. Once the new grip is applied and properly positioned over the binding cutout areas, re-screw the fasteners, ensuring the holes are perfectly aligned. This operation adds approximately 10 minutes to the total installation time.
How do I differentiate between Renegade V1 and Diablo Renegade?
The main difference is the chassis on which the bindings are mounted. The Renegade V1 has its own deck with a specific shape and unique dimensions. The Diablo Renegade uses the Diablo deck (longer and wider) equipped with Renegade bindings. Check your invoice or compare visually: the Diablo Renegade has the characteristic profile of the Diablo with its aggressive lines, while the Renegade V1 has a more compact design.
Does Renegade grip tape wear out faster off-road?
Intensive all-terrain use puts more stress on the grip tape: constant vibrations, dirt and gravel projections, and dynamic movements during jumps and obstacle crossings. However, on the Renegade with bindings, your feet are attached and exert less sliding friction than on a classic skateboard. Wear primarily comes from abrasive debris. Clean your grip tape after each off-road session to remove particles and extend its lifespan.
Can I use standard grip tape on my Renegade?
No, standard grip tape is not suitable for the Renegade. Renegade grip tape includes specific cutouts for binding placements. Standard grip tape (GTR, Hadean, Diablo) does not have these cutouts and would need to be manually perforated, which is difficult to do cleanly and risks damaging the grip tape. Furthermore, deck dimensions differ. Always use grip tape designed for your exact model.
How do I correctly align the grip tape with the binding holes?
Alignment is made easier by the grip tape's precise pre-cutouts. When applying, start by positioning the grip tape, visually aligning the cutouts with the deck holes. First, apply one edge without fully sticking it down to check alignment. Once satisfied, slowly progress by pressing from the center outwards. If a slight adjustment is needed, you can slightly enlarge the holes with a utility knife after installation.
Is this grip tape suitable for the Stoke or other Evolve models?
No, this grip tape is exclusively for Renegade configurations (with bindings). The Stoke, GTR, GTX, Hadean, and standard Diablo have different decks and do not use bindings. Each Evolve model has its dedicated grip tape with the exact dimensions of its deck. For the Stoke, use the Stoke grip tape. For other models, choose the corresponding grip tape from our catalog.
Customer reviews
Loading reviews...
